Home page

Cap remover

After being applied to SMT, the component-mounted suction cups are automatically removed; custom grippers can be used to accommodate different suction cup types, with adjustable and maintainable gripping force. Vacuum is then drawn to evacuate the waste material into the waste collection box.

Online Inquiry

Category:

NG/OK unloader

Product Description

- Commodity name: Cap remover
After being applied to SMT, the component-mounted suction cups are automatically removed; custom grippers can be used to accommodate different suction cup types, with adjustable and maintainable gripping force. Vacuum is then drawn to evacuate the waste material into the waste collection box.
Characteristics

1. Single-track and dual-track compatibility
2. Electric gripper type: force-holding, with controllable gripping force
3. Compatible with the vast majority of adsorption caps
4. Different heights and pressures can be set for different adsorption caps.
6. Industrial camera-based visual positioning with mature and accurate software algorithms.
7. Automatic detection of clamping failure, with the option for a second clamp.

Parameters
- External dimensions: (mm) L1000 × W1500 × H1700
- Operating voltage: AC 220 V / 50/60 Hz; Number of electric grippers: 1–3 pcs.
- Docking height (mm): 910 ± 30 mm
- Electric gripper type: force-holding, with controllable gripping force
- Air supply: 4–6 bar
- Compatible board sizes:
- 450*300*45 mm (L*W*H),
- Up and down meet 35mm;
- Transmission method: Flat belt
- Operating method: PC
- Control System: PC + PLC + Buttons
- Communication Method: Standard SMEMA Interface + Ethernet Port
- Transmission direction: bidirectional—left-to-right and right-to-left
- Fixed track, width adjustment method: The fixed track is located at the front of the machine and features automatic width adjustment.
- Clearance reserved on the T and B sides of the substrate: 35 mm on the T side, 35 mm on the B side.