Single lane conveyor
1. Standard equipped with one-button direction switching for flexible and convenient operation.
2. Ergonomic design to reduce arm fatigue.
3. Control method: PLC + touch screen control
4. Smooth, parallel width adjustment and automatic width adjustment
5. Customize machine length according to customer requirements.
6. Customize the number of stop boards according to customer requirements.
7. Easy-to-replace belt design
8. Standard SMEMA connector
View more
2. Ergonomic design to reduce arm fatigue.
3. Control method: PLC + touch screen control
4. Smooth, parallel width adjustment and automatic width adjustment
5. Customize machine length according to customer requirements.
6. Customize the number of stop boards according to customer requirements.
7. Easy-to-replace belt design
8. Standard SMEMA connector
Dual lane conveyor
1. Standard equipped with one-button direction switching for flexible and convenient operation.
2. Ergonomic design to reduce arm fatigue.
3. Control method: PLC + touch screen control
4. Smooth, parallel width adjustment and automatic width adjustment
5. Customize machine length according to customer requirements.
6. Customize the number of stop boards according to customer requirements.
7. Easy-to-replace belt design
8. Standard SMEMA connector
View more
2. Ergonomic design to reduce arm fatigue.
3. Control method: PLC + touch screen control
4. Smooth, parallel width adjustment and automatic width adjustment
5. Customize machine length according to customer requirements.
6. Customize the number of stop boards according to customer requirements.
7. Easy-to-replace belt design
8. Standard SMEMA connector
Reject/buffer conveyor
1. Can be used as a buffer, or installed after AOI and SPI as a reject-board sorting machine.
2. The number of NG stop boards per track is 1 piece.
3. Control method: PLC + touch screen control
4. The lifting mechanism is driven by an electric motor, ensuring stable and smooth operation.
5. The functional mode supports three modes: caching, filtering NG boards, and pass-through.
6. Signal connections shall be made using standard SMEMA signal connectors.
View more
2. The number of NG stop boards per track is 1 piece.
3. Control method: PLC + touch screen control
4. The lifting mechanism is driven by an electric motor, ensuring stable and smooth operation.
5. The functional mode supports three modes: caching, filtering NG boards, and pass-through.
6. Signal connections shall be made using standard SMEMA signal connectors.
Dual lane shuttie conveyor
1. Robust and stable design
2. The control method is PLC + touch screen control.
3. Equipped with an intelligent system for one-click width adjustment and remote fault monitoring.
4. The cushioning and deceleration design ensures smoother, more precise operation.
5. Ball screw adjustment enables convenient and precise PCB width adjustment.
6. Standard SMEMA interface
View more
2. The control method is PLC + touch screen control.
3. Equipped with an intelligent system for one-click width adjustment and remote fault monitoring.
4. The cushioning and deceleration design ensures smoother, more precise operation.
5. Ball screw adjustment enables convenient and precise PCB width adjustment.
6. Standard SMEMA interface
Buffer
1. The control system is PLC-based with a touch screen interface.
2. This equipment is suitable for PCB cooling after the SMT reflow oven and for adjusting the line takt time in the buffering and staging section.
3. Two 30 mm linear guide rails shall be installed alongside the lifting lead screw to assist in the vertical movement of the material frame, ensuring smooth and stable lifting and lowering.
4. The temporary storage area can hold a maximum of 20 pieces.
5. One storage unit features independent lifting and lowering, driven by a Leadshine servo motor for precise positioning.
6. Supports FIFO, LIFO, and direct-through modes.
7. Use standard SMEMA communication
View more
2. This equipment is suitable for PCB cooling after the SMT reflow oven and for adjusting the line takt time in the buffering and staging section.
3. Two 30 mm linear guide rails shall be installed alongside the lifting lead screw to assist in the vertical movement of the material frame, ensuring smooth and stable lifting and lowering.
4. The temporary storage area can hold a maximum of 20 pieces.
5. One storage unit features independent lifting and lowering, driven by a Leadshine servo motor for precise positioning.
6. Supports FIFO, LIFO, and direct-through modes.
7. Use standard SMEMA communication
Decapper
1. Single-track and dual-track compatibility
2. Electric gripper type: force-holding, with controllable gripping force
3. Compatible with the vast majority of adsorption caps
4. Different heights and pressures can be set for different adsorption caps.
5. Industrial camera-based visual positioning with mature and accurate software algorithms.
6. Automatic detection of clamping failure, with the option for secondary clamping.
View more
2. Electric gripper type: force-holding, with controllable gripping force
3. Compatible with the vast majority of adsorption caps
4. Different heights and pressures can be set for different adsorption caps.
5. Industrial camera-based visual positioning with mature and accurate software algorithms.
6. Automatic detection of clamping failure, with the option for secondary clamping.
Straight-through integrated unloader
1. The control system is PLC-based with a touch screen interface.
2. Track Design: An L-shaped seamless track design is adopted to prevent thin boards from being inserted into the conveyor belt and to eliminate wear on both the PCB and the fixture tracks.
3. Dual sensors are installed at the infeed and outfeed positions of the conveyor track to prevent board jams.
4. Each axis and sensor can have its status monitored via I/O; input and output settings can be modified through the software for convenient fault analysis, and a device reset will initialize all parameters.
5. Wear-resistant stainless steel plates are added to the end stops of the pallet and box infeed and outfeed mechanisms to prevent rail wear.
6. Use standard SMEMA communication.
View more
2. Track Design: An L-shaped seamless track design is adopted to prevent thin boards from being inserted into the conveyor belt and to eliminate wear on both the PCB and the fixture tracks.
3. Dual sensors are installed at the infeed and outfeed positions of the conveyor track to prevent board jams.
4. Each axis and sensor can have its status monitored via I/O; input and output settings can be modified through the software for convenient fault analysis, and a device reset will initialize all parameters.
5. Wear-resistant stainless steel plates are added to the end stops of the pallet and box infeed and outfeed mechanisms to prevent rail wear.
6. Use standard SMEMA communication.
Flipper
1. Import and export conveyor equipped with protective photoelectric sensors to ensure smooth product conveyance and pallet alarm.
2. Features single- and double-sided flip-board modes to enhance production efficiency.
3. The control system is PLC-based with a touch screen interface.
4. The flip plate is restrained by a pneumatic cylinder, and the cylinder’s position is adjustable.
5. The motor enables rapid, smooth, and precise alignment with a direct-through function, ensuring convenience and efficiency.
6. After flipping, an electromagnet provides auxiliary positioning to ensure smoother rotation.
7. Use standard SMEMA communication.
View more
2. Features single- and double-sided flip-board modes to enhance production efficiency.
3. The control system is PLC-based with a touch screen interface.
4. The flip plate is restrained by a pneumatic cylinder, and the cylinder’s position is adjustable.
5. The motor enables rapid, smooth, and precise alignment with a direct-through function, ensuring convenience and efficiency.
6. After flipping, an electromagnet provides auxiliary positioning to ensure smoother rotation.
7. Use standard SMEMA communication.
PCB Cleaner
1. The control system is PLC-based with a touch screen interface.
2. Primarily used for dust removal from PCB panel films.
3. Static elimination rods; when used in conjunction with static eliminators at the outlet, they effectively neutralize static electricity on the product, enhancing dust removal and thereby improving product quality and yield.
4. Convenient for replacing the dust-collection paper roll, making equipment maintenance and cleaning easy. Simply replace the paper roll on a regular basis to control the contact and pressure between the pneumatic roller and the product surface, thereby achieving effective dust removal.
5. Superior dust-removal performance—absolutely no risk of scratching the product surface. The dust-removal roller contacts the web material, lifting contaminants and transferring them to a layer-by-layer peelable adhesive dust-collection roll.
View more
2. Primarily used for dust removal from PCB panel films.
3. Static elimination rods; when used in conjunction with static eliminators at the outlet, they effectively neutralize static electricity on the product, enhancing dust removal and thereby improving product quality and yield.
4. Convenient for replacing the dust-collection paper roll, making equipment maintenance and cleaning easy. Simply replace the paper roll on a regular basis to control the contact and pressure between the pneumatic roller and the product surface, thereby achieving effective dust removal.
5. Superior dust-removal performance—absolutely no risk of scratching the product surface. The dust-removal roller contacts the web material, lifting contaminants and transferring them to a layer-by-layer peelable adhesive dust-collection roll.
Hotline
+86 18279151751
Address: Yongxinda Industrial Park, Building 17, No.4 Industrial Zone, Heshuikou Community, Matian Street, Guangming District, Shenzhen
Email：market@evertrusty.com
After-sales hotline: +86 13416766166 Huang Baisong
Sales Hotline: +86 13828894831 Cindy Pu (South China)
+86 13510850821 Dylan Fan (East China)
+86 18018796295 Zhou Run (Southwest)
Products
Online consultation
Copyright © 2023 Shenzhen Yongxinda Technology Co., Ltd.
