Home page

Buffer

1. The control system is PLC-based with a touch screen interface.
2. This equipment is suitable for PCB cooling after the SMT reflow oven and for adjusting the line takt time in the buffering and staging section.
3. Two 30 mm linear guide rails shall be installed alongside the lifting lead screw to assist in the vertical movement of the material frame, ensuring smooth and stable lifting and lowering.
4. The temporary storage area can hold a maximum of 20 pieces.
5. One storage unit features independent lifting and lowering, driven by a Leadshine servo motor for precise positioning.
6. Supports FIFO, LIFO, and direct-through modes.
7. Use standard SMEMA communication

Online Inquiry

Category:

Products

Automotive electronic products

Buffer

Product Description

Commodity name: Buffer

1. The control system is PLC-based with a touch screen interface. 2. This equipment is suitable for PCB cooling after the SMT reflow oven and for adjusting the line takt time in the buffering and staging section. 3. Two 30 mm linear guide rails shall be installed alongside the lifting lead screw to assist in the vertical movement of the material frame, ensuring smooth and stable lifting and lowering. 4. The temporary storage area can hold a maximum of 20 pieces. 5. One storage unit features independent lifting and lowering, driven by a Leadshine servo motor for precise positioning. 6. Supports FIFO, LIFO, and direct-through modes. 7. Use standard SMEMA communication

This equipment is used after the SMT reflow oven to buffer PCBs and balance line takt time, enabling unmanned or reduced-staff operations and enhancing customer profitability.

Characteristics

1. The control system is PLC-based with a touch screen interface.
2. This equipment is suitable for PCB cooling after the SMT reflow oven and for adjusting the line takt time in the buffering and staging section.
3. Two 30 mm linear guide rails shall be installed alongside the lifting lead screw to assist in the vertical movement of the material frame, ensuring smooth and stable lifting and lowering.
4. The temporary storage area can hold a maximum of 20 pieces.
5. One storage unit features independent lifting and lowering, driven by a Leadshine servo motor for precise positioning.
6. Supports FIFO, LIFO, and through-put modes.
7. Use standard SMEMA communication

Technical Specifications

Standard specification.
Project	Standard parameters
PCB transmission height	920 ± 30 (height of the conveyor track above ground)
PCB flow	Left to right / Right to left (as specified by the customer)
Voltage & Frequency	220V & 50~60Hz
Project	SMT
PCB thickness	0.6-4mm
Communication Method	Uses standard SMEMA signal connectors
Transmission weight	4.5 kg;
Clearance for transmission	Upper part ≥ 60 mm, lower part ≥ 40 mm